Setting Detection Levels Of Radar Alarm - JRC JMA-2353 Instruction Manual

2.14 SETTING DETECTION LEVELS OF RADAR
ALARM
Detection levels can be set to issue alarms from the radar alarm.
Reference:
For details of display settings for radar alarm, see "2.7.7 DISPLAYING THE RADAR
ALARM AND AUTOMATIC ACQUISITION OPERATIONS".
 "RADAR Alarm" operations
1 Open Main Menu - RADAR Alarm .
"RADAR Alarm" menu appears.
 Setting Detection Level
1 Open RADAR Alarm
"RADAR Alarm1 Level" menu appears.
Select Level1, Level2, Level3 or Level4.
Operate the same way for the settings of "RADAR Alarm2 Level".
Note:
 Select Level1, Level2, Level3 or Level4 for alarm level.
When setting to lower level of detection, the alarm operates for weaker targets.
When setting to higher level of detection, be careful because the alarm may not
operate properly.

2.14 SETTING DETECTION LEVELS OF RADAR ALARM

- RADAR Alarm1 Level .
Chapter 2 OPERATIONS
2-101
2