Marking - JRC JMA-2353 Instruction Manual

Chapter 2 OPERATIONS
2.7 SOFT KEY OPERATION

2.7.17 MARKING

Marks can be indicated at arbitrary positions on the screen.
A mark created on the screen holds the latitude and longitude.
Reference:
 Bearing signal input and latitude/longitude data input are required to use marks.
 Up to 200 lines/marks can be displayed for lines, marks and event marks in total.
 When the marks are hidden in "2.7.15 SETTING SYMBOL DISPLAY", marks cannot
be created.
 This function is initially set to off. To use this function, set this to on by referring to "■
Soft Key Menu Setting" in "4.10 Control" of the Installation Manual.
1 Select Mark
The "Mark" soft key display appears.
2 Operate with the soft keys.
Soft key 1: X
The mark type of a target is changed.
Soft key 2: Not available
Soft key 3: Delete
Press to delete the marks of selected type.
Hold down to delete all marks.
2-66
on the soft key menu.
"Mark" is color-inverted.
+ Y
The confirmation dialog window is displayed.
(Marks and event marks are not distinguished when deleting.)