Process - JRC JMA-2353 Instruction Manual

Chapter 2 OPERATIONS
2.9 RADAR ECHO SETTINGS
2.9.3

PROCESS

 Process
This function reduces unnecessary noise to highlight targets.
Note:
 When viewing a radar beacon, SART signal, or fast moving target on the radar
display, do not use this function.
 This function is suitable for use in TM mode.
 When used in RM mode, use with N Up or C Up. This can be used with H Up,
however, the video may be blurred. Use this in TM mode.
Reference:
The bearing data input is required for video processing.
1 Open
"Process" menu appears.
Off :
3Scan COREL : Select this mode when many rain/snow clutter returns are
4Scan COREL : Select this mode to highlight targets while suppressing sea
5Scan COREL : Select this mode to detect small targets hidden by sea clutter
Remain
Peak Hold :
2-78
RADAR Echo - Process .
Select this mode in general.
detected.
clutter returns.
returns.
: Select this mode when own ship yaws wildly.
Select this mode to detect small targets of which detection
probability is low.