Video Noise Rejection - JRC JMA-2353 Instruction Manual

Chapter 2 OPERATIONS
2.9 RADAR ECHO SETTINGS
 Video Latitude
Select Normal
Narrow
2.9.6

VIDEO NOISE REJECTION

 Video Noise Rejection
This function rejects signals that assumed as noise and clutter in radar videos.
1 Open
Off :
Level1
Level2
Level3
 Video Noise Rejection
Select Off
Select Level1 ,
2-80
in standard, and Wide1
clearly displays short-range videos when STC is used in manual mode.
RADAR Echo - Video Noise Rejection .
Turns off the noise rejection function, and displays all signals.
Targets are popped up from noise and displayed like analog signals.
: Rejects the signals of definitely unwanted waves (noise and clutter).
When detection of targets or unwanted waves is not definite, the
signals are displayed.
When detection of targets is definite, the signals are displayed.
: Rejects the signals of definitely unwanted waves (noise and clutter).
When detection of targets or unwanted waves is not definite, the
signals are rejected.
When detection of targets is definite, the signals are displayed.
: Select if "Level1" and "Level2" cannot reject the signals enough.
to display radar videos like analog signals.
Level2 or Level3
in rainy weather.
to suppress noise and clutter.