Administrator mode settings
10.5
Administrator Settings (IP/I-FAX)
This section explains Administrator settings specified for Internet fax and IP address fax operations.
10.5.1
System Settings - Power Save Settings - Enter Power Save Mode
For the setting procedure, refer to "System Settings - Power Save Settings - Enter Power Save Mode" on
page 10-17.
10.5.2
System Settings - Restrict User Access
Restrict Access to Job Settings - Registering and Changing Addresses
For the setting procedure, refer to "Restrict Access to Job Settings - Registering and Changing Addresses"
on page 10-10.
Restrict Access to Job Settings - Change the "From" Address
For the setting procedure, refer to "Restrict Access to Job Settings - Change the "From" Address (E-Mail)"
on page 10-11.
!
Detail
The From address is the address specified for the device.
Restrict Operation - Restrict Broadcasting
For the setting procedure, refer to "Restrict Operation - Restrict Broadcasting" on page 10-11.
10.5.3
System Settings - Stamp Settings - Fax TX Settings
For the setting procedure, refer to "System Settings - Stamp Settings - Fax TX Settings" on page 10-19.
10.5.4
Network Settings - Network Fax Settings
Network Fax Function Settings
For the Network Fax Function Setting procedure, refer to User manual – Network Administrator.
SMTP TX Settings
For the SMTP TX setting procedure, refer to User manual – Network Administrator.
SMTP RX Settings
For the SMTP RX setting procedure, refer to User manual – Network Administrator.
10.5.5
Fax Settings - Header Information
For the setting procedure, refer to "Fax Settings - Header Information" on page 10-20.
!
Detail
For RTI, [Outside Body Text] cannot be used for Internet fax/IP address fax. Even when [Outside Body
Text] is selected, the information is attached inside the body text.
10.5.6
Fax Settings - Header/Footer Position
For the setting procedure, refer to "Fax Settings - Header/Footer Position" on page 10-21.
10.5.7
Fax Settings - Line Parameter Setting (IP)
Number of Redials
For the setting procedure, refer to "Number of Redials" on page 10-25.
Redial Interval
For the setting procedure, refer to "Redial Interval" on page 10-25.
bizhub 751/601 (Version 2)
10
10-51