Scanning
5
Touch [Register Program].
The Register Scan/Fax Program screen appears.
6
Touch [Name], and then use the control panel keypad and the keyboard that appears in the touch panel
to type in the name of the program.
–
The program name can contain a maximum of 24 characters.
–
To stop registering the program, press the [Reset] key or the [Mode Memory] key.
–
For details on typing in text, refer to "Entering text" on page 7-4.
7
Touch [OK].
8
Touch [Address], and then select the destination.
–
When selecting destinations registered in the address book, destinations can be selected from each
destination type.
–
Destinations can be specified either by selecting destinations registered in the address book or by
typing them in directly.
–
Destinations that cannot be specified, such as fax destinations, are not displayed.
bizhub C451/C550/C650
3
3-19