Scanner Settings - Konica Minolta bizhub C451 Network Scanner Operations

5

Scanner Settings

Specify the Web Service settings related to scanning. Settings can be specified for the following.
Parameter
Scanner Name
Scanner Location
Scanner Information
Connection Timeout
1
Touch [5 Network Setting] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the administrator
settings screen" on page 4-6.
2
Touch [Forward
3
Touch [3 Scanner Settings].
4
To use this machine as a scanner, touch [ON], and then specify the desired settings.
5
Touch [Close].
6
Touch [OK].
A message appears, indicating that network data is being edited. Do not turn off the main power switch
while this message is displayed.
5-86
Description
Specify the name of the scanner (up to 63 characters).
Specify the setup location of the scanner (up to 63 characters).
Type in information for the scanner (up to 63 characters).
Specify the length of time until the connection between this machine and the com-
puter times out. (Range: 30 to 300 seconds)
] in the Network Settings screen, and then touch [4 Web Service Settings].
Network settings
bizhub C451/C550/C650