Network settings
–
In order to perform user authentication with POP Before SMTP, some settings must be specified so
that the mail server can be accessed correctly with POP. For details, refer to "E-mail RX (POP)" on
page 5-62.
5
Touch [Forward
E-Mail TX (SMTP) screen 2/5 appears.
6
Specify the desired settings.
–
To specify the host address, touch [Host Address]. For details, refer to "SMTP server address" on
page 5-59.
7
Touch [Forward
E-Mail TX (SMTP) screen 3/5 appears.
8
Specify the desired settings.
–
If virus scanning software is used on the mail server, the Binary Division feature may not be
available. For details, contact your network administrator.
bizhub C451/C550/C650
].
].
5
5-57