E-Mail Text - Konica Minolta bizhub C451 Network Scanner Operations

4
Note
The registration cannot be completed if no setting is specified for "Subject".
To cancel the registration, touch [Cancel].
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears.

E-mail text

Up to 10 e-mail message body texts can be registered. A registered body text can be selected when sending.
1
Touch [3 E-Mail Settings] in the Create One-Touch Destination screen.
– For details on displaying the Create One-Touch Destination screen, refer to "Displaying the create
one-touch destination screen" on page 4-4.
2
Touch [2 E-Mail Body].
The E-Mail Body screen appears.
3
Touch [New].
The New screen appears.
4
Touch [Body], and then type in the registration body text, using the keyboard that appears.
– For details on typing in text, refer to "Entering text" on page 7-4.
– Up to 256 characters can be entered.
5
Touch [OK].
The e-mail body text is registered.
4-24
Specifying utility mode parameters
bizhub C451/C550/C650