Belt-Positioning Booster Installation - DJG Vantage Point Surveyor Instruction Manual

Comfort highback booster
Table of Contents

Advertisement

4358-3492D Singles
5/27/09
2:19 PM
4
5
34
Page 37
From bottom of seat,
locate buckle's metal clip.
Insert buckle's metal clip
up through the shell and
pad. From the front, pull
buckle free from shell and
pad. Lock buckle plates
into buckle for future use.
Belt-Positioning Booster
Installation
Rotate recline stand
1
down, then push up
firmly until it locks in
place.
Place child restraint
2
against the back of the
vehicle seat.
NOTE:
anchorage strap and
hook under the child
restraint.
Place the child's bottom
and back flat against the
child restraint.
Place lap belt across
3
child's thighs. Lock
buckle.
NOTE:
restraint has armrests,
make sure the lap and
shoulder belt are placed
under armrest as shown.
WARNING
!
Use only the vehicle's lap and shoulder
belt system when restraining the child in
this booster seat. Failure to do this can
result in serious injury or death.
35
Tuck the top
If your child
continued on next page.

Advertisement

Table of Contents
loading

Table of Contents