Belt-Positioning Booster Use; Belt-Positioning Booster Installation - DJG Intera Base Only Instruction Manual

Belt-positioning booster
Table of Contents

Advertisement

4538-3439C Intera Base
7/19/05

Belt-Positioning Booster Use

Lap/Shoulder Belt
5:04 PM
Page 17
Refer to the "Choosing
Restraint and Position" section
to make sure your child is at
the proper weight and height
to use the belt-positioning
booster.
When your child is over 40 lbs.
(18.1 kg) or 43" (110.1 cm) and
over 1 year old, you must use
this base as a belt-positioning
booster.
Some vehicle belts will not
work with a child restraint.
See previous page for specific
instructions.
14

Belt-Positioning Booster Installation

1
2
WARNING
!
Do not use the base if the midpoint of your
child's head is above the top of the vehicle seat
back.
3
Use the backless booster
seat in the upright
position only.
For upright position, pull out
on handle and push down on
front of booster seat.
Place booster seat against the
back of the vehicle seat. Have
child sit in seat with his back
and bottom fully in the seat.
Lift the armrest that is on the
opposite side of the vehicle
seat buckle by squeezing
buttons on the armrest and
swing up.
continued on next page.
15

Advertisement

Table of Contents
loading

Table of Contents