Belt-Positioning Booster Use; Removal Of Harness - DJG Vantage Point Surveyor Instruction Manual

Comfort highback booster
Table of Contents

Advertisement

4358-3492D Singles
5/27/09
2:19 PM

Belt-Positioning Booster Use

Lap/Shoulder Belt
!
WARNING
Loose LATCH hooks can result in serious
injury or death.
32
Page 35
Refer to the "Choosing
Restraint and Position"
section to make sure
your child is at the
proper weight and
height to use the belt-
positioning booster.
Do not use LATCH or
tether strap when using
the Belt-Positioning
Booster.
You MUST fasten the
LATCH belt hooks
together behind seat.
When your child is
over 40 lbs. (18.1 kg) or
43" (110.1 cm) and
over 1 year old, you
must remove the
harness and use this
child restraint as a belt-
positioning booster.

Removal of Harness

Harness must be removed for use as a
Belt-Positioning Booster.
From the back of the
1
seat, unfasten harness
from splitter plate.
Pull harness adjustment
2
strap as far out as
possible.
Pull harness through the
3
slots from the front.
Unthread harness from
the harness retainer.
Unthread harness from
the buckle plates.
Pull harness out of shell.
33
continued on next page.

Advertisement

Table of Contents
loading

Table of Contents