Belt-Positioning Booster Installation - DJG Alpha Omega Instruction Manual

4
5
6
44
4358-5843A US All in One.indd 47-48 4358-5843A US All in One.indd 47-48
Fully recline the child
restaint. Reach under the
seat between base and
shell. Locate the buckle's
metal retainer.
Rotate the metal retainer
and then insert the
retainer up through the
shell and pad.
From the front, pull buckle
free from shell and pad.
Lock buckle plates into
buckle for future use.
Belt-Positioning Booster
Installation
The top anchorage strap
1
and hook is not used for
belt-positioning booster
use. Attach the tether
hook to the bottom
of the base as shown.
Tighten to remove slack.
LATCH is not used for
2
belt-positioning booster
use. Store LATCH as
shown.
Place booster seat
3
against the back of
the vehicle seat. Tuck
the top anchorage
hook under the child
restraint. Have child sit
in seat with his back and
bottom fully in the seat.
45
continued on next page.
1/26/12 11:06 AM 1/26/12 11:06 AM