Belt-Positioning Booster Use; Removal Of Harness - DJG Alpha Omega Instruction Manual

Belt-Positioning Booster Use

Lap/Shoulder Belt
WARNING
!
A loose LATCH system can result in
serious injury or death.
42
4358-5843A US All in One.indd 45-46 4358-5843A US All in One.indd 45-46
Refer to the "Choosing
Restraint and Position"
section to make sure
your child is at the proper
weight and height to
use the belt-positioning
booster.
Do not use LATCH
when using the belt-
positioning booster.
You MUST fasten the
LATCH belt hooks
together behind seat.
When your child is over
40 lbs. (18.1 kg) or 43"
(110.1 cm) and over
1 year old, you must
remove the harness
system and use this seat
as a belt-positioning
booster.

Removal of Harness

Harness must be removed for use as a
belt-positioning booster.
From the back of the
1
seat, unfasten harness
straps from splitter plate.
Store splitter plate by
2
pushing it through one
opening and out the
other.
Pull harness through the
3
slots and harness covers
from the front.
Unthread harness from
the chest clip.
Unthread harness from
the buckle plates.
Pull harness out of shell.
43
continued on next page.
1/26/12 11:06 AM 1/26/12 11:06 AM