1 TROUBLESHOOTING FOR THE HARDWARE
Place paper in the bypass tray again and then move
3
the green paper holding lever toward the inside.
If a sheet of paper is stained, folded or torn, replace it with a new one.
Paper misfeed in the automatic duplexing unit
Be careful not to let your fingers be caught between the equipment and the duplexing unit or automatic duplexing
unit.
This could injure you.
Open the automatic duplexing unit on the right.
1
Remove paper misfed on the paper transport path
2
above the fuser unit. (Only for e-STUDIO356/456)
While holding the green lever to lift up the transfer
3
unit, remove the misfed paper.
Lower the transfer unit carefully and then close the automatic duplexing unit.
4
22
Clearing a Paper Misfeed
2
1
2
1