Paper Misfeed In The Saddle Stitch Unit Of The Saddle Stitch Finisher Mj-1106 (Optional) - Toshiba e-STUDIO 206L Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE
 Paper misfeed in the Saddle Stitch unit of the Saddle Stitch Finisher MJ-1106
(optional)
Remove the misfed paper from the exit side of the
1
Saddle Stitch unit.
Open the front cover of the finisher.
2
Holding the green knob, move the guide to the right.
3
Raise the lever and open the upper receiving tray of
4
the finisher.
Open the cover of the Hole Punch Unit when it is
5
installed.
36 Clearing a Paper Misfeed
2
1