Paper Misfeed In The Fuser Unit - Toshiba e-STUDIO 206L Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE
 Paper misfeed in the fuser unit
 Be careful not to let your fingers be caught between the equipment and the duplexing unit or automatic
duplexing unit.
This could injure you.
 Do not touch the fuser unit or the metal portion around it.
Since they are very hot, you could be burned or the shock could cause you to get your hand injured in the machine.
e-STUDIO256/356/456/506
Open the automatic duplexing unit on the right.
1
Press down the two green fuser pressure release
2
levers until they stop.
The fuser pressure release levers will automatically return to their
original position when the automatic duplexing unit is closed.
Open the transport guide holding the green knob and
3
then release the misfed paper. Pull the misfed paper
up or down as shown in the illustrations depending
on the position of the paper.
Pulling it up
Pulling it down
24 Clearing a Paper Misfeed
2
1