Toshiba e-STUDIO 206L Troubleshooting Manual page 72

1 TROUBLESHOOTING FOR THE HARDWARE
Remove the staple cartridge.
4
Take the empty staple case out of the staple cartridge.
5
Pull up the empty staple case while pushing both sides as shown in the
figure.
Fit a new staple case on the staple cartridge.
6
Push the staple case hook into the staple cartridge socket until you
hear a click.
7 Fit the staple cartridge into the stapler.
Insert the cartridge until it is caught by the latch and fixed with a click.
8 Return the Hole Punch Unit to its original position.
70 Refilling With Staples