Staple Jam In The Saddle Stitch Unit - Toshiba e-STUDIO 206L Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE
 Staple jam in the Saddle Stitch unit
 Saddle Stitch finisher MJ-1106
Open the front cover of the finisher, and pull out the
1
Saddle Stitch unit until it stops.
Remove the staple cartridge.
2
Raise the guide while holding the knob.
3
Do not touch the stapling area.
The actual needle point could cause you personal injury.
4 Remove the top staple sheet.
5 Holding the knob, lower the guide, and return it to its
original position.
58 Clearing a Staple Jam
1 1
2 2