PIAGGIO Beverly 500 i.e. Workshop Manual page 278

Suspensions
•
Extract the roller bearing using the spe-
cial tool.
N.B.
POSITION THE PLIERS FOR EXTRACTING UNDER THE
UPPER EDGE OF THE ROLLER BEARING.
Specific tooling
001467Y010 Driver for OD 25 mm bearings
001467Y019 Extraction pliers for ø 18 mm bear-
ings
Refitting
•
Insert the spacer on the ball bearing
using the special tool.
Specific tooling
020357Y 32x35-mm Adaptor
020362Y 12 mm guide
020376Y Adaptor handle
•
Heat the bearing seat on the swinging
arm.
•
Insert the bearing to abutment using
the special tool.
N.B.
THE BEARING SPACER MUST BE INSERTED FROM THE
INSIDE OF THE SWINGING ARM.
N.B.
DO NOT DETERIORATE THE PAINTED SURFACE WHILE
WARMING THE SWINGING ARM.
Specific tooling
020151Y Air heater
020376Y Adaptor handle
020362Y 12 mm guide
020357Y 32x35-mm Adaptor
SUSP - 278
Beverly 500 i.e.