PIAGGIO Beverly 500 i.e. Workshop Manual page 53

Beverly 500 i.e.
•
Perform the operations for removal in the reverse order according to the tightening torque
indicated in Chapter "Characteristics".
Check that there is a small clearance when the valve is in abutment against the set screw.
•
Check the engine oil level and top up using the recommended brand, if required.
•
Top up the coolant circuit.
•
Check that throttle and electric devices are in good working order.
CAUTION
PAY PARTICULAR ATTENTION TO POSITIONING THE THROTTLE CONTROL TRANSMISSION
PROPERLY.
Engine from vehicle
ENG VE - 53