PIAGGIO Beverly 500 i.e. Workshop Manual page 169

Beverly 500 i.e.
The EMS control unit power supply is further con-
trolled by the emergency switch and by the side
stand switch, that is to provide further safety for the
scooter.
The ignition system control unit is programmed to ensure optimal carburetion while riding along streets.
The idle carburetion needs to be adjusted to compensate for the production tolerances and engine
settlement.
This adjustment is done by modifying the injector opening time with the engine running at idle.
To adjust, proceed as follows:
1 - Idle carburetion adjustment must be performed on an engine ready for precision adjustment.
Check in advance:
- spark plug
- that air filter is clean
- that throttle body is clean
- intake system for sealing
- exhaust system for sealing
- valve clearance
- fuel filter
- Fuel pressure
N.B.
IDLE SPEED IS OBTAINED BY PRE-CALIBRATING THE THROTTLE BODY AND THE ACTIVITY
OF THE STEPPER.
Characteristic
Engine idle speed
1500 ± 50 rpm
Check that the throttle body is not tampered.
YES go to 2
2 - Preheat and check the zero setting of the ex-
haust fumes analyser.
Remove the exhaust manifold cover and connect
the extension to the coupling clamp for the analy-
ser pipe.
YES go to 3
Injection
INJEC - 169