PIAGGIO Beverly 500 i.e. Workshop Manual page 168

Scooter
Hide thumbs Also See for Beverly 500 i.e.:
Table of Contents

Advertisement

Injection
Of course, this cannot happen when the rpm-timing signal is missing, or when the failure involves the
control circuits:
- Fuel pump
- HV coil
- Injector
The control unit is provided with a self-diagnosis
system connected to an indicator light in the in-
strument panel.
Failures are detected and restored by the diag-
nostic tester.
In any case, when the fault is no longer present,
the data storage is automatically cleared after 16
cycles of use (cold start, running at regular engine
temperature, stop).
The diagnostic tester is also required to adjust the
idle mixture.
Specific tooling
020680Y Diagnosis Tool
The EMS injection-ignition system has a control
function over the rpm indicator and the radiator
cooling electric fan.
The EMS is connected to the anti-theft immobilizer
system decoder.
In turn, the decoder is connected to a flashing di-
agnostic LED that also serves as deterrent.
INJEC - 168
Beverly 500 i.e.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bv 500 usa

Table of Contents