PIAGGIO Beverly 500 i.e. Workshop Manual page 277

Beverly 500 i.e.
•
Extract the right bearing using the
modular punch through the left bearing
seat (removed before).
Specific tooling
020363Y 20-mm guide
020375Y 28 x 30 mm adaptor
020376Y Adaptor handle
Overhaul
•
Properly support the swinging arm in
the vice.
•
Remove the Seeger ring.
•
Remove the ball bearing bushing.
•
Extract the ball bearing using the spe-
cial tool.
Specific tooling
001467Y017 Driver for OD 36 mm bearings
001467Y034 Pliers to extract ø 15-mm bearings
Suspensions
SUSP - 277