Table of Contents
Advertisement
The mounting base attaches to the bottom of the WLAN Access Port (2230/2231) with two supplied screws, and then the
assembly slides and locks onto two sheet metal, drywall, or other screws.
•
When you are mounting the WLAN Access Port (2230/2231) out from a wall (flat sides along the room or hallway), use
the projection-mount L-bracket supplied with the WLAN Access Port (2230/2231). Use the L-bracket to mark the sheet
metal, drywall, or other screw locations.
•
When you are mounting the WLAN Access Port (2230/2231) against a wall (flat Side A toward the inside of the
building), use the flush-mount bracket supplied with the WLAN Access Port (2230/2231). The flush-mount L-bracket is
the one with one long and one short leg. Use the L-bracket to mark the sheet metal, drywall, or other screw locations.
About Physical Security
Regardless of mounting, the WLAN Access Port (2230/2231) can be secured with a Kensington MicroSaver Security Cable. If
required, use any MicroSaver Security Cable to attach either side of your WLAN Access Port (2230/2231) to a solid beam, pipe, or
support.
May 2004
Planning Notes
About Physical Security
22
Advertisement
Table of Contents
