Nortel 2230l 2231 Quick Install Manual page 20

Note:
If the screws do not securely hold the bracket, remove the WLAN Access Port (2230/2231) and adjust the
screws until they securely hold the bracket.
Figure -
Assembling the WLAN Access Port (2230/2231) to the Flush-Mount Bracket
• Attach the cables to the sides of the WLAN Access Port (2230/2231).
Note:
Make sure the cables are routed away from the WLAN Access Port (2230/2231) antennas.
Note:
When the WLAN Access Port (2230/2231) is powered up and is associated with an Nortel Networks WLAN -
Security Switch (2270) (Green/Power and Yellow/802.11b/g and/or Yellow or Amber/802.11a LEDs lit), the WLAN
Access Port (2230/2231) begins broadcasting its beacon signal(s). When this happens, complete the installation as
quickly as possible to remove yourself from within 8 inches (20 cm) of the WLAN Access Port (2230/2231) to comply
with FCC RF radiation exposure guidelines.
You have installed the WLAN Access Port (2230/2231). Repeat
WLAN Access Port (2230/2231) location, and then continue with
May 2004
Step 4: Mounting the WLAN Access Ports (2230/2231)
Step 4: Mounting the WLAN Access Ports (2230/2231)
Step 5: Returning MAC Information.
04022108
for each
18