Table of Contents
Advertisement
Ceiling Mount Base
When you are mounting the Nortel Networks WLAN - Access Port (2230/2231) in the middle of a ceiling (flat sides toward the
room or hallway), use the ceiling-mount base to mount the Nortel Networks WLAN - Access Port (2230/2231) as shown in the
following figure and as described below:
Figure -
Assembling the Nortel Networks WLAN - Access Port (2230/2231) and Ceiling-Mount Base
•
Copy the MAC address(es) from the label(s) on the Nortel Networks WLAN - Access Port (2230/2231) onto the corre-
sponding location on the map. MAC addresses have the format 000B85xxxxxx.
•
Attach the ceiling-mount base to the bottom of the Nortel Networks WLAN - Access Port (2230/2231) using the
factory-supplied machine screws and washers.
•
Position the ceiling-mount base so its keyhole slots are partly on the drywall, sheet metal, or other screw heads installed
in
Step 3: Preparing Mounting
Note:
If the screws do not securely hold the ceiling-mount base, remove the Nortel Networks WLAN - Access Port
(2230/2231) and adjust the screws until they hold the ceiling-mount base securely.
•
Attach the cables to the sides of the Nortel Networks WLAN - Access Port (2230/2231).
May 2004
Step 4: Mounting the WLAN Access Ports (2230/2231)
Ceiling Mount Base
Locations.
0
12
Advertisement
Table of Contents
