Items Supplied With Unit; Hanging The Boiler - Buderus 600 - 11S Installation And Servicing Instructions

Installation
1.4

Items supplied with unit

Check the contents against the packing list to ensure that
nothing is missing.
Requirements to be met by the place of installation
NOTE
Observe all statutory building regulations
applying to the place of installation.
DANGER!
Inflammable materials or liquids must not be
stored or used near wall-mounted condensing
gas boilers. The site of installation must be
frost-protected.
1.5

Hanging the boiler

CAUTION
DO NOT remove the polystyrene foam bottom
slab protecting the connection nozzles.
During installation work, cover the wall-
mounted condensing gas boiler and the flue
gas adapter to prevent site dirt from entering,
e. g. using aluminium foil.
Attach the manifold assembly to the wall (see fig. 5,
item 1).
Attach the pipes.
Attach the wall bracket.
When using a stand-off frame, refer to the manual of the
stand-off frame for the correct mounting instructions.
Loosen the retaining screw on the bottom of the
condensing gas boiler.
Detach the outer casing of the condensing gas boiler.
Hang the condensing gas boiler onto the wall bracket
(fig. 5).
NOTE
If the boiler isn't connected to the pipework
immediately, place caps on the pipe
connections.
Subject to modifications resulting from technical improvements!
Installation and maintenance instructions for wall-mounted condensing gas boiler 600 - 11S/19S/24S/24C • 05/2004
1
6
Fig. 4 Items supplied with unit
Key to fig. 4:
1: Wall-mounted condensing gas boiler
2: Wall bracket
3: Technical documents
4: Manifold assembly
5: Filling loop
6: Plastic bag containing the following accessories:
4 x wall fixing-screws
4 x wall plugs
4 x washers
Seals (1 x 1", 2 x ¾", 2 x ½")
Square wrench
Initial start-up sticker
Second identification plate
Safety valve nipple (from ¾" to ½")
Fig. 5 Installation
Boulter Buderus Ltd. • http://www.boulter-buderus.co.uk
1
2
3
4
5
1
11