Items Supplied With Unit; Hanging The Boiler - Buderus 500 - 24/S Installation And Maintenance Instructions Manual

1 Installation
1.3

Items supplied with unit

Check the contents against the packing list to ensure that
nothing is missing.
Requirements to be met by the place of installation
NOTE
Observe all statutory building regulations
applying to the place of installation.
DANGER!
Inflammable materials or liquids must not be
stored or used near wall-mounted condensing
gas boilers. The site of installation must be
frost-protected.
1.4

Hanging the boiler

NOTE
Refer to manual of the wall spacing frame,
which is supplied with the unit, for the correct
mounting instructions when using a wall
spacing frame.
CAUTION
DO NOT remove the polystyrene foam bottom
slab until lifted into position.
During installation work, cover the wall-
mounted condensing gas boiler and the flue
gas adapter to prevent site dirt from entering.
Hang the wall mounting template.
Drill the necessary holes.
Buderus • http://www.buderus-domestic.co.uk
10
1
fig. 1 Items supplied with unit
Key to fig. 1:
1: Wall-mounted condensing gas system boiler
2: Wall bracket
3: Manifold Assembly
4: Wall spacing frame
5: Bracket for ModuLink 250 RF
6: Technical documents:
1 x Installation and maintenance manual
1 x User manual
1 x Wall mounting template
1 x Benchmark Logbook
1 x Warranty card
1 x Wall spacing frame instruction
1 x Envelope for Warranty card
7: Plastic bag containing the following accessories:
4 x wall fixing screws
4 x wall plugs
4 x washers
8 x fixing screws for wall spacing frame
Seals (1 x G½" - 1", 2 x ¾" - 22 mm, 2 x ½" - 15 mm)
Initial start-up sticker
Second identification plate
Pressure Relief Valve compression fitting + pipe
Radiator key
fig. 2 Installation
Subject to modifications resulting from technical improvements!
Installation and maintenance instructions for Buderus 500 - 24/S • 08/2006
2
6
7
5
3
2
1
4