The room in which the boiler is installed must be frost-proof and be well ventilated. Subject to modifications resulting from technical improvements! Buderus • http://www.buderus-domestic.co.uk Users manual for Buderus 600 - 11S / 19S / 24S / 24C • edition 02/2006...
(fig. 2) with a screwdriver to the middle setting. Fig. 2 Three-way valve Buderus • http://www.buderus-domestic.co.uk Subject to modifications resulting from technical improvements! Users manual for Buderus 600 - 11S / 19S / 24S / 24C • edition 02/2006...
Page 5
Shut both stop valves and disconnect the filling loop. °C Fig. 5 Pressure display Subject to modifications resulting from technical improvements! Buderus • http://www.buderus-domestic.co.uk Users manual for Buderus 600 - 11S / 19S / 24S / 24C • edition 02/2006...
Page 6
CORGI registered installer. Have the inhibitor concentration checked every year. Buderus • http://www.buderus-domestic.co.uk Subject to modifications resulting from technical improvements! Users manual for Buderus 600 - 11S / 19S / 24S / 24C • edition 02/2006...
Page 7
(58 °C, new building) up to controller, 24 V (80 °C, old building)* Basic setting: Have the specific system settings of the Buderus control system and burner-control unit control panel adjusted by a specialist heating system company. Table 1 Flow temperature Subject to modifications resulting from technical improvements! Buderus •...
Page 8
Shut cover for 2nd control box and control panel. Fig. 9 2nd control box Buderus • http://www.buderus-domestic.co.uk Subject to modifications resulting from technical improvements! Users manual for Buderus 600 - 11S / 19S / 24S / 24C • edition 02/2006...
Page 9
Normal hot water mode Flashing after three start-up attempts. Table 4 Operational and fault codes Subject to modifications resulting from technical improvements! Buderus • http://www.buderus-domestic.co.uk Users manual for Buderus 600 - 11S / 19S / 24S / 24C • edition 02/2006...