Copying, Loading, And Storing Fat Channel Settings; Metering - PRESONUS StudioLive 16.4.2 Owner's Manual

4 Controls
4.1 The Fat Channel

Copying, Loading, and Storing Fat Channel Settings

4.1.6
4.2

Metering

• All 16 inputs, post-gain and pre-dynamics, pre-EQ, and pre-fader
• All 16 inputs, post-dynamics, post-EQ, and post-fader
• The gain reduction for all 16 inputs
• The output volume of each of the 6 aux sends
• The output volume of both of the internal effects buses
32 32 32
Every setting in the Fat Channel can be copied from one channel to another
and can be saved and stored as a user preset to be recalled later.
Press the Copy button to copy the settings on the selected channel or bus. Every
Select button on the StudioLive except the button for the currently selected channel
will begin to flash. The Select button for the selected channel will not illuminate. You
can copy a Fat Channel setting from any channel or bus to any combination of
channels and buses.
The Load button will also start to flash.
To paste the current channel's Fat Channel setting to another channel or bus, simply
press that channel's Select button. It will stop flashing and illuminate. After you have
selected every channel to which you want the settings pasted, press the Load button.
The StudioLive will return to its normal state, indicating that the Fat Channel settings
have been successfully pasted.
The Load button can also be used to recall saved settings and
presets. For complete recall instructions, see Section 5.2.
You can save your Fat Channel settings for future use. To store the currently selected
channel's Fat Channel settings, press the Save button. For complete channel-preset
storage instructions, see Section 5.2.
The StudioLive offers flexible metering at the touch of a button.
The 16 meters in the Fat Channel section can monitor:
Finally, the meters can be used to recall the fader settings for a saved Scene.
PreSonus StudioLive 16.4.2
™