Enabling The Audio Driver; Configuring Your Midi Devices - PRESONUS StudioLive 16.4.2 Owner's Manual

Owner's Manual

Enabling the Audio Driver

7.5.2
Start Page: Setup Area
7.5.3

Configuring Your MIDI Devices

Software: Universal Control, SL Remote, Capture, Studio One Artist
Studio One and Studio One Artist were designed with PreSonus interfaces
in mind. Your StudioLive is already integrated into Studio One Artist, so
setup is quick and easy. When Studio One Artist is launched, by default
you will be taken to the Start page. On this page, you will find document-
management and device-configuration controls, as well as a customizable
artist profile, a news feed, and links to demos and tutorials from PreSonus.
If you have an Internet connection on your computer, these links will be
updated as new tutorials become available on the PreSonus Web site.
Complete information on all aspects of Studio One Artist is
available in the Reference Manual PDF located on the Studio
One Artist installation disc. The information in this tutorial covers
only the basic aspects of Studio One Artist and is intended
to get you set up and recording as quickly as possible.
Shows Active Audio Driver and Sample Rate and Provides
Quick Links to Configure Audio and MIDI.
In the middle of the Start page, you will see the Setup
area. Studio One Artist automatically scans your
system for all available drivers and selects a driver. By
default, it will choose a PreSonus driver if one is
available.
Selecting a Different Audio Driver
from the Start Page
Your StudioLive uses the same driver as the FireStudio
family of interfaces. If you do not see "PreSonus
FireStudio" on the Start page when you launch Studio
One, click on the Configure Audio Devices link in the
Setup area to open the Audio Setup Options window.
In the Audio Device menu, select "PreSonus
FireStudio. " Click the Apply button and then OK.
After you have verified that the PreSonus FireStudio Universal
driver has been detected, please continue to the next section to
set up your external MIDI devices. If you do not have any MIDI
devices to connect at this time, please skip to Section 7.5.4.
From the External Devices window in Studio One Artist, you can configure
your MIDI keyboard controller, sound modules, and control surfaces.
This section will take you through setting up your MIDI keyboard
controller and sound module. Please consult the Reference Manual
located on your Studio One Artist installation DVD for complete setup
instructions for other MIDI devices. Before beginning this section,
you must first install the drivers for your MIDI interface or USB MIDI
Controller keyboard. Please consult the documentation that came
with your MIDI hardware for complete installation instructions.
Studio One Artist Quick Start
7
7.5
127 127