PRESONUS StudioLive 16.4.2 Owner's Manual page 129

Owner's Manual
Software: Universal Control, SL Remote, Capture, Studio One Artist
Now you can plug the guitar or guitar-amp mic into an input
channel on the StudioLive mixer and set the input level as you
normally would. Then add the guitar-input channel to the Aux
1/2 mix that the guitarist will listen to so he can hear himself.
If you record-enable the Audio Track that corresponds to the
guitar input channel in Capture, you should see that track's
level meter showing live input in the meter bridge.
With the Aux 1/2 mix set so that the guitarist can hear his live guitar-
playing and the tracks from Capture, you are ready to record the
lead guitar. You can position the playback cursor to any point in the
Timeline so that recording starts there or just start recording from the
beginning of the Session. Once you have the lead-guitar part recorded,
you might find a few things you would like to correct in the part. This
is where punching, as described in the next section, comes in handy.
7
Capture 7.4
123 123