PRESONUS StudioLive 16.4.2 Owner's Manual page 36

4 Controls
4.1 The Fat Channel
High EQ On/
Activates Control for the High EQ for the
Off Button
Selected Input or Output.
This button actives control of the
High band for the selected channel
or bus. The button will illuminate
to indicate control is active.
The High EQ band is available for all input and
output buses.
High EQ
Sets and Displays the Center Frequency of
Frequency
the High EQ.
Control
This encoder sets, and the meter
displays, the center frequency of
the High band. You can adjust the
center frequency from 1.4 to 18
kHz.
High EQ Gain
Sets and Displays the Gain Attenuation or
Control
Boost at the Center Frequency of the High
Frequency Band.
This encoder sets, and the meter
displays, the gain cut or boost at
the center frequency of the High
EQ band. The level of the center
frequency can be set between -15
and +15 dB.
30 30 30
PreSonus StudioLive
High Shelving
Turns on the High Shelving EQ for the
EQ Button
Selected Input or Output Bus.
When the Shelf button is not
engaged, the High band is a
semi-parametric EQ. Enabling the
Shelf button turns the High band
into a high shelving EQ that alters,
by a fixed amount, a band of high
frequencies at and above a
user-selected shelving frequency.
Power User Tip: A high shelving EQ is like a
treble-control knob on a stereo. In this mode, the
Center Frequency control selects the shelving
frequency.
Note: See also Graphic Equalizers, Section 5.3
16.4.2
™