PRESONUS StudioLive 16.4.2 Owner's Manual page 20

3 Hookup
3.1 Rear-Panel Connections
14 14
S/PDIF Output. By default, the S/PDIF output receives the same signal as the main
outputs, so no activation is necessary. However, any buses that can be routed to the
auxiliary FireWire returns can be routed to the S/PDIF output, either through the
System menu in the Digital Effects | Master Control section, or in the StudioLive
Control Panel. (See Sections 5.4 and 7.2.5 for more information.) Because the
StudioLive cannot be synced externally, you will need to use it as the master clock
and set your S/PDIF-equipped device to receive word clock externally via S/PDIF.
Please consult the documentation for your external digital device for instructions.
2 Amp Fuse. This is the StudioLive's fuse housing. Your StudioLive uses a 5 mm x 20
mm, 250 VAC, fast-acting fuse.
Power-adapter Input. This is where you plug in the provided IEC power cable.
Power Switch. Push the top part of the switch ( | ) to turn on your StudioLive. Push
the bottom part of the switch ( O ) to turn it off.
PreSonus StudioLive 16.4.2
™