SiENBE18-621
FVXS 25/35/50 B
CAUTION
Before cleaning, be sure to stop the operation and turn the breaker OFF.
UNITS
" Indoor unit, Outdoor unit and Remote control
1. Wipe them with dry soft cloth.
" Front grille
1. Open the front panel.
•
2. Remove the front panel.
3. Clean the front panel
4. Attach the front panel.
CAUTION
•
Hold the front grille firmly so that it does not fall.
•
Do not touch the metal parts on the inside of the indoor unit, as it may result in injury.
•
When removing or attaching the front panel, use a robust and stable stool and watch your steps carefully.
•
When removing or attaching the front panel, support the panel securely with hand to prevent it from falling.
•
For cleaning, do not use hot water above 40°C, benzine, gasoline, thinner, nor other volatile oils, polishing compound,
scrubbing brushes, nor other hand stuff.
•
After cleaning, make sure that the front panel is securely fixed.
System Configuration
Press the two "
" places on the left and right
P U S H
of the front panel.
•
Remove the chain.
•
Allowing the front panel to fall forward will
enable you to remove it.
•
Wipe softly with a damp cloth.
•
Only neutral detergent may be used.
•
In case of washing the front panel with water,
dry it with cloth, dry it up in the shade after
washing.
•
Insert the front panel into the grooves of the
unit (3 places).
•
Attach the chain to the right, inner-side of the
front panel.
•
Close the panel slowly.
Chain
Place front panel in grooves.
Instruction
219