SiENBE18-621
" Outdoor Unit
15
" Indoor Unit
1. Air outlet
2. Air outlet grille: (Field supply)
•
Appearance of the Air outlet grille and Air inlet grille
may differ with some models
3. Display, Control panel
4. Suction grille: (option)
•
Appearance of the suction grille and Air inlet grille may
differ with some models.
5. Air inlet
6. Room temperature sensor:
•
It senses the air temperature around the unit.
7. Operation lamp (green)
8. TIMER lamp (yellow)
9. HOME LEAVE lamp (red):
•
Lights up when you use HOME LEAVE operation.
" Outdoor Unit
11. Air inlet: (Back and side)
12. Refrigerant piping and inter-unit cable
13. Drain hose
Appearance of the outdoor unit may differ from some models.
System Configuration
11
10. Indoor Unit ON/OFF switch:
•
Push this switch once to start operation.
Push once again to stop it.
•
This switch is useful when the remote control is
missing.
•
The operation mode refers to the following table.
Temperature
Mode
FDKS
COOL
FDXS
AUTO
14. Earth terminal:
•
It is inside of this cover.
15. Air outlet
Instruction
12
13
14
Air flow
setting
rate
22°C
AUTO
25°C
AUTO
165