Daikin E-Series Service Manual page 196

SiENBE18-621
" To adjust the vertical blades (louvers)
• When adjusting the louver, use a robust and stable stool and watch your
steps carefully.
Hold the knob and move the louvers.
(You will find a knob on the left side and the right side blades.)
Notes on flaps and louvers angels.
• Unless [SWING] is selected, you should set the flap at a near- horizontal
angle in COOL or DRY mode to obtain the best performance.
• In COOL or DRY mode, if the flap is fixed at a downward position, the flap
automatically moves in about 60 minutes to prevent condensation on it.
" ATTENTION
• Always use a remote control to adjust the flap angle.If you attempt to
move it forcibly with hand when it is swinging, the mechanism may be
broken.
• Be careful when adjusting the louvers. Inside the air outlet, a fan is
rotating at a high speed.
System Configuration
DRY
COOL
FAN
HEAT
Instruction
185