(G) Confirm And Change The Indoor Unit Address - Sanyo SPW-C483GYH8 Service Manual

1. Troubleshooting

(G) Confirm and change the indoor unit address

The purpose of the above function is to let you confirm the indoor unit address after the auto. address opera-
tion, and change the indoor unit address if it is needed.
a
Press the TEST / CHK and
b
Select the R.C. No. which you want to change with the UNIT (up) or FLAP (down) buttons.
3
c
Press the SET button (to confirm the R.C. No.).
The smallest registered indoor No. and the selected R.C. No. will be displayed.
d
Select the indoor No. which you want to change with UNIT button. Once in this mode, the fan motor of selected
indoor unit will turn on and let you confirm the indoor unit address.
( ) buttons at the same time for more than 4 seconds.
AIR FLOW
UNIT MODE
R.C.
FLAP
SET TEMP.
CODE No.
TIMER SET
FAN SPEED
SETTING
SET DATA
SET CL
ON •
OFF •
TEST / CHK
AIR FLOW
UNIT
MODE
UNIT No.
R.C. No.
FLAP
SET TEMP.
CODE No.
TIMER SET
FAN SPEED
SETTING
SET DATA
SET CL
ON •
OFF •
TEST / CHK
0362_M_I
Ex:
R.C. No. 3 is selected.
Indoor No. 2 is the smallest indoor No. of the R.C. No.
3.
0363_M_I
III - 30
Service Procedures
SM830052