Ports Priority - Draytek Vigor2130 Series User Manual

M o v i n g U p
M o v i n g U p
Click and
D e l e t i n g a
D e l e t i n g a
To delete a QCE in the list, simply click
4 . 6 . 5 P o r t s P r i o r i
4 . 6 . 5 P o r t s P r i o r i
This page allows you to configure QoS settings for each port. The classification is controlled
by a QCL (Quality Control List) that is assigned to each port. A QCL consists of an ordered
list of up to 12 QCEs (Quality Control Entry). Each QCE can be used to classify certain
frames to a specific QoS class. This classification can be based on parameters such as VLAN
ID, UDP/TCP port, IPv4/IPv6 DSCP or Tag Priority. Frames not matching any of the QCEs
are classified to the default QoS class for the port.
Port
Default Class
QCL (QoS Control List )
Queuing Mode
/ D o w n a Q C E
/ D o w n a Q C E
to move a QCE up and down.
Q C E
Q C E
t y
t y
Indicate the interface for the physical port, WAN port, LAN
port and Wireless Port.
Use the drop down list to choose the priority for each port.
Use the drop down list to choose the QCL number defined in
QoS Control List for the port.
Use the drop down list to choose suitable mode.
of that one. It will be removed immediately.
126
Vigor2130 Series User's Guide