System Operation Example (With A Camera Control Unit) - Sony HXC-100 Operating Instructions Manual

System operation example (with a Camera Control Unit)

Microphone
CAC-12
Microphone
Holder
Zoom Lens
(for ENG/EFP)
"Memory Stick"
VCT-U14
Tripod Adaptor
Tripod for
portable
camera
a) Supplied with the HDVF-550/C550W/C730W, Part No.: A-7612-405-E
b) 600 m (1969 ft) at maximum and 50 m (164 ft) at minimum when using Fujikura 8.5-mm dia. cables.
For information of other cables, see "About the distances of triax transmission" (page 37).
An HXC-100 and HSCU-300 can be connected if both units are of version 1.10 or later.
c)
d) Enabled only when an HXCU-100 is connected.
Parts Identification
Front right
1
2
3
4
5
6
7
qh
6
Overview
HDVF-550/C550W/C730W
Viewfinder
HDVF-200/C35W
Viewfinder
VF attachment shoe
Intercom headset
HXC-100
Triax cable
Power supply
for a script light
DC 12 V
(Max. 0.5 A)
CAC-6
Return Video Selector
qg qf qd
a)
Return video input
Sync input Prompter video input
b)
HXCU-100/
c)
HSCU-300
Camera Control Unit
(attached to the front)
d)
HKCU-FP1
Front Control Panel
a INCOM (intercom) button (UC model)/ENG (engineer
line) button (CE model)
UC model: The intercom microphone is on while this button is
held pressed.
CE model: The intercom microphone is on and the engineer
line is selected while this button is held pressed.
You can also assign other functions with a menu operation.
b RET 1 (return video 1) button
The return video 1 signal from the CCU is monitored on the
viewfinder screen while this button is held pressed. It functions
8
the same as the RET 1 button on the operation panel (page 8)
on the rear of the camera.
You can also assign other functions with a menu operation.
c Accessory shoe
9
To attach an accessory using a 1/4-inch screw.
0
qa
Note
qs
When you wish to replace it with a slide-type shoe, consult
Sony service personnel.
d Viewfinder shoe
Mount a viewfinder.
For details, see "Attaching a Viewfinder" (page 11).
e Lens cable clamp
To secure the cable of the lens (optional).
Picture
Monitor
Waveform
Monitor
BNC BNC
Video router
Video output
HD-SDI/SD-SDI/VBS
to router/switcher
AC power
CCA-5 cable
RCP-1000-series
Remote Control Panel