Menu Configuration And Basic Menu Operations; Basic Operating Procedure - Sony HXC-100 Operating Instructions Manual

Menu Configuration and Basic Menu Operations

The RCP-750/751 provides menu operations for
various functions such as adjustments of system
equipment.

Basic Operating Procedure

1
PAINT 1 PAINT 2 PAINT 3 SCENE MAINTE
When all the MODE buttons are not lit, the status
display (see the next page) is obtained.
1
To display a menu, press and light one of the
MODE buttons.
The menu operation mode is initiated and the menu
for the pressed button appears on the display.
PAINT 1/2/3: Paint menu
See page 14(E) for the display configuration and page
18(E) for the menu items.
SCENE: Scene file operation menu
See page 16(E) for the display configuration and
operation.
MAINTENANCE: Maintenance menu
See page 21(E) for the menu items and page 25(E) for
adjustments.
FUNCTION: Function menu
See page 17(E) for the display configuration and page
24(E) for the menu items.
FUNCTION
NANCE
2
3
2
Select the item to be adjusted.
Press the button that shows the name of the item on
the menu to obtain the corresponding adjustment
display or operation area.
When the selected menu is composed of
multiple pages
With the menu that is composed of multiple pages
such as Paint menu, press v or V to flip the pages.
See "Initial display (Paint menu)" on the next page.
When a submenu is shown
Press the desired submenu item to change the
display.
See "Submenu" on page 15(E).
3
Set or adjust the item (parameters).
• Turn the control knobs (or press the button) to
adjust (or set) the corresponding item
(parameters) to the desired values.
See "Adjustment display (Paint menu)" on page 15(E).
• When a message is displayed, follow the
instruction and press
When the adjustment is finished
• To adjust another item of the same menu, press the
names of that item.
• To adjust items of another menu, press the
corresponding MODE button.
• To release the menu operation mode, press the lit
MODE button.
• You may select Function menu without exiting the
currently selected menu. When you exit Function
menu by either of the following methods, the
previous menu is restored.
– Press the lit FUNCTION button so that it goes dark.
– Press the lit MODE button for the previous menu.
[OK]
.
13(E)