Yamaha XVS650 Service Manual page 342

[Q] Fasten the battery positive
(+)
lead with a bat-
tery box clam p.
If] The carburetor heater relay should not touch
the wire harness.
[Q] Fasten the wire harness with a plastic locking tie.
[ill Place the end of the plastic locking tie as shown.
[§] From the engine.
[I] Pass the starter motor lead over the battery
negative (-) lead.
[Q] Fasten the pickup coil lead, A.C. magneto lead,
neutral switch lead and starter motor lead with
CABLE ROUTING
I
SPEC
IU-I
a plastic locking tie.
[2] Fasten the battery negative (-) lead, starter
motor lead and wire harness with a plastic
locking tie.
IWl
Fasten the wire harness with a clamp.
00
Fasten the battery negative (-) lead and tail!
brake light lead with a clamp.
[YJ Pass the wire harness between the frame and
battery box.
[%] Fasten the starter cable with a plastic locking
tie.
a-a
A-A
-9 -