Yamaha XVS650 Service Manual page 263

~~~~~~~~~~~~SH_A_R~DR_W_E_ICHA~~I
3.Remove:
• Final drive roller bearing
CD
**********************************
Removal steps:
• Heat the final gear case to 150
c
C (302"F).
• Using an appropriately shaped punch
®
remove the roller bearing outer races.
• Remove the inner race from the final drive
shaft.
NOTE: _
The removal of the final drive shaft roller
bearing is a difficult procedure and is rarely
necessary.
**********************************
4.1nstall:
• Final drive roller bearing (new)
**********************************
Installation steps:
• Heat the final gear case to 150 cC (302"F).
• Install the roller bearing outer races using
the proper adapter.
• Install the inner race onto the drive shaft.
**********************************
5.1nstall:
• Guide collar
CD
• Oil seal
® _
• Roller bearing (outer race)
®
To install the above' components into the
final gear case use a suitable press tool @
and a press.