Yamaha XVS650 Service Manual page 148

CLUTCH
ENG
NOTE: _
• Apply engine oil onto the friction plates.
• Align the two slots
®
on the friction
plates with the two punch marks (S) on the
clutch housing.
**********************************
4.1nstall:
• Push rod #2
• Ball
• Push rod #1
CD
.O-ring® _
• Push plate @
• Washer@
• Nut®
NOTE: _
Apply lithium soap base grease onto the
push rod and the ball.
5.1nstall:
• Pressure plate
CD
• Clutch springs ®
• Bolts@
~-8-N-m-(-o.-8-m-.-k-g,-5-.8-ft-.I-b)-
NOTE: _
Tighten the pressure plate bolts in stages,
using a crisscross pattern.
6.Check:
• Push lever position
• Push the push lever assembly in the direc-
tion of the arrow and make sure that the
match marks are aligned.
Match marks not aligned. ~ Adjust.
®
Match mark on the push lever assembly
(6)
Match mark on the crankcase
7.Adjust:
• Push lever position
**********************************
Adjustment steps:
• Loosen the nut
CD.
• Turn the push rod #1 ® clockwise or
counterclockwise so that the match marks
are aligned.
• Tighten the nut
CD.
~
Nut (clutch adjuster):
~~
8 Nm (0.8 m • kg, 5.8 ft • Ib)
4-41
**********************************