Removing The Waste Ink Pads; Reinstalling The Waste Ink Pads - Epson Stylus Photo R1800 Service Manual

EPSON Stylus Photo R1800/R2400
4.2.2 Waste Ink Pad
1. Remove the Lower Housing. See Section 4.2.1.5 on page 78.
2. Remove the C.B.P. M3 x 8 screw that secures the Waste Ink Tube.
3. Remove the 15 Waste Ink Pads from the Lower Housing.
Waste Ink Pads
Figure 4-14. Removing the Waste Ink Pads
Disassembly And Assembly
4) C.B.P. 3x8
(6±1 kgf.cm)
Disassembly
Referring to Figure 4-15., correctly install the Waste Ink
Pads.
4
3
Installation
2
Order
2
1
1
Figure 4-15. Reinstalling the Waste Ink Pads
Revision B
Installation
4
Order
3
2
1
80