Front Paper Guide And Paper Eject Roller; Removing The Ej Grounding Spring; Reinstalling The Ej Grounding Spring - Epson Stylus Photo R1800 Service Manual

EPSON Stylus Photo R1800/R2400
A D J U S T M E N T After replacing the following part, be sure to apply G-26 grease
R E Q U I R E D
to the specified area.
Upper Paper Guide Assy
Disassembly And Assembly
See Figure 6-9 on page 177.

4.2.6.12 Front Paper Guide and Paper eject roller

1. Remove the Printer Mechanism.
2. Remove the Paper EJ Frame Assy.
3. Release the Carriage lock, and move the Carriage Unit to the center.
Section 4.2.1.3 on page 75.
4. Remove the EJ Grounding Spring from the Main Frame with tweezers.
EJ Grounding
Spring
Figure 4-114. Removing the EJ Grounding Spring
Referring to
Spring.
Figure 4-115. Reinstalling the EJ Grounding Spring
Disassembly
See Section 4.2.1.5 on page 78.
See Section 4.2.6.6 on page 105.
Figure 4-115., correctly install the EJ Grounding
Revision B
See
116