Maintenance Functions - Epson Stylus Photo R1800 Service Manual

EPSON Stylus Photo R1800/R2400
Function Item
Ink Charge This function is used for Print Head replacement to drain
Shipping Liquid of the after-sales service part in the head
flow path and simultaneously fill ink in the head flow path
to make all nozzles printable and stabilize the ink in the
Print Head.
Refurbishment This function is used to refurbish the initially returned
Function(Shipping product. Specifically, clean the inside of the Head, and
Liquid replacement) charge and replace the Shipping Liquid.
Cleaning This function is used to execute cleaning 3 (CL3) when ink
is not delivered from the Print Head properly, e.g. dot
missing or skewed injection.
Waste Ink Counter This function is used to read and reset the Waste Ink
Reset Counters.
Adjustment
Table 5-2. Maintenance Functions
Purpose
1. Select this function in the Adjustment Program.
2. Transfer the factory-set command (CL execution command (Initial Ink Charge) is used
1. Select this function in the Adjustment Program.
1. Select this function in the Adjustment Program.
2. Execute CL3.
1. In the Adjustment Program, select data read or reset from this function.
Adjustment Items and Overview
Method Outline
as the command) to the printer to make the printer perform Initial Ink Charge operation.
Before executing this function, replace the Waste Ink Pads on both the 0 digit and 130
digit side.
Revision B
132