Site Requirements - DataCard CD Series Installation And Manual

Site Requirements

Set up and use the printer in an
environment that meets the
following requirements.
Provide space for the printer
•
and for clearance around
the printer. The printer
dimensions and clearance
area are shown in the
following table.
Printer
Model
SD260
SD260L and
SD360 with
Smart Card
CD800
CD800 with
optional multi-
card hopper
Options such as a large output stacker and 200-card input hopper add height to the
printer. Additional clearance is required when using these options.
Place the printer in an environment with temperatures ranging from 60° to
•
95°F (15° to 35°C).
Use a single‐phase, 3‐wire, grounded receptacle.
•
Place the system and its supplies in a clean office environment, keeping paper
•
and foreign materials off the equipment.
Place the printer on a sturdy, level surface.
•
SD/CD Installation and Administrator's Guide
Dimensions (inches/mm)
A B
10.00 8.80 4.00
254 224
10.00 8.80 4.00
254 224
10.00 8.80 4.00
254 224
N/A 14.5 8.00
369
C D
6.85 4.00
102 174 102
6.85 4.00
102 174 102
6.85 4.00
102 174 102
16.5 15
203 419 381
E F G
15.37 4.00
390 102
21.21 4.00
539 102
21.21 4.00
539 102
27.5 4.00
699 102
3