Selection Keys - Ricoh SP 3510SF Quick Manual

1 One Touch buttons
Press to select a scan or fax Quick
Dial destination.
2 [Address Book] key
Press to select a scan or fax destina-
tion from the Address Book.
3 [On Hook Dial] key
Press to use on-hook dialing to check
the destination's status when sending
a fax.
4 [User Tools] key
Press to display the menu for configur-
ing the machine's system settings.
5 [Image Quality] key
Press to select scan quality for the
current copy, scan, or fax job.
6 [Shortcut to Func.] key
Press to use the function pre-assigned
for this key.
For details, see "Administrator Set-
tings", User Guide.
7 [Copy]/[Facsimile]/
[Scanner] key
Press to switch the machine's opera-
tion mode.

8 Selection keys

Press the key that corresponds to an
item shown on the bottom line of the
screen to select it.
9 [Density] key
Press to adjust image density for the
current copy, scan, or fax job.
10 [Reduce/Enlarge] key
Press to specify the reduction /en-
largement ratio for the current copy
job, or the document size for the cur-
rent scan job.
11 [Pause/Redial] key
Press to insert a pause in a fax number,
or display the last used scan or fax
destination.
12 [Shift] key
Press to switch between Quick Dial
numbers 1 to 10 and 11 to 20 when
specifying a scan or fax destination
using the One Touch buttons.
CMF356
7